+86 4000-198-196
Hotline
Feature:
Display Screen: 320×240 dot matrix, 2.4 inch color screen.
A scan snapshot
Zero passage measurement
Adjusted gain
Biggest/minimum value caught
Difference/cut rate model
High/low limit alarm
Display Screen: 320×240 dot matrix, 2.4 inch color screen.
A scan snapshot
Zero passage measurement
Adjusted gain
Biggest/minimum value caught
Difference/cut rate model
High/low limit alarm
The ultrasonic thickness gage uses dual element transducers for corrosion applications. It offers many basic features such as Min/Max Mode that measures and recalls the minimum thickness at a fast 20 readings per second, Freeze Mode to instantly capture critical thickness, and Zero Compensation, A-scan display for echo-echo measurement.
Measurements from one side
Ultrasonic thickness gages make instant digital measurements by transmitting sound into a material from one side, making it unnecessary to cut the corroded part.
Lightweight and pocket-size
These handheld gages are small enough to fit in a toolbox or inside your pocket. They are ideal for quick inspections in hard-to-reach areas.
Color-coded keypad
You can directly access many important measurement features for time-saving operation. Strategically located keys are grouped together by color for easy operation.
Large OLED display
The large numerals make it easy to read thickness measurements.
These handheld gages are small enough to fit in a toolbox or inside your pocket. They are ideal for quick inspections in hard-to-reach areas.
Color-coded keypad
You can directly access many important measurement features for time-saving operation. Strategically located keys are grouped together by color for easy operation.
Large OLED display
The large numerals make it easy to read thickness measurements.
SPECIFICATION:
Thickness range: 0.6 mm - 508 mm, ( 0.008 - 20 inches )
depending on material, temperature and transducer selection
Material Velocity Calibration Range: 500 - 9999 m/s (0.0197 - 0.3937 in/uS )
Battery type: 2 "AA" Alkaline
Battery life: Up to 35 hours
Color Display: 320x240 pixels, 2.4” high resolution OLED display
Display contrast: 10000:1
Information displays: LOS, min, max, large reading while displaying min at
the same time, velocity, zero, calibration, units, freeze, unfreeze, % battery life
remaining, gain - low, std, high, echo to echo symbol
Resolution: 0.01 or 1mm . (0. 001" or 0.01”)
Units: English/Metric
Gain: Low, Standard and High for varying test conditions
Measurement rate: 4, 8, 16 Hz refresh
Differential Mode: Displays the difference from the actual
thickness measurement and a user entered reference value
Alarms: Minimum/Maximum depth, beeps and display flashes as well as keypad illumination
Shut off: Manual or Auto, time out (user programmable from 5,10,20 minutes)
Fast Scan Min/Max mode: Displays minimum or maximum thickness value
Freeze mode: Freezes display to hold onto last reading
Scan mode: Displays minimum or maximum thickness value
Differential Mode: Displays the difference from the actual thickness measurement and a user
entered reference value
Alarms: Minimum/Maximum depth
Keypad: Color Illuminate , easy setup and operate
Waveform: Color A-scan Waveform display
Gain Adjust: low, medium and high variable adjustment of gain
Rectification Modes: A-San Shot
Echo to Echo: Measures the metal thickness only (ignore paint and coatings)
Data logger: 100,000 thickness data logger with ID point in linear or grid files ( 400 files)
Output: USB 2.0 full speed connector. DataView report software
Size: 153mm) (L) 76mm) (W) x 1.25" (37 mm) (H)
Weight: 280 g
Temperature: Gage Operating: -10° C to 50° C
Standard Package includes:
Ultrasonic thickness gage
- 5MHz, 10 mm diameter transducer
- operational manual,
- probe cable,
- couplant ,
- certificate,
- hard carrying case
Warranty: 2 year warranty on parts and labor
